Sale!

Monoprice 300-Watt (150w RMS x2) Studio Audio Amplifier (605030)

$115.99 $81.44

30% Saving!
You save total $34.55

SKU: B011JNVIYICategory:
Feature:

  • In stereo mode it produces 150 watts per channel RMS (300 watts per channel peak) into a 4-ohm load or 100 watts per channel RMS (200 watts per channel peak) into an 8-ohm load.
  • When driving a 2-ohm load, it can produce 250 watts per channel RMS (500 watts per channel peak). When bridged for mono mode, the amplifier produces 500 watts RMS (1000 watts peak) into a 4-ohm load and 360 watts RMS (720 watts peak) into an 8-ohm load.
  • It features an extremely flat 20Hz ~ 20kHz (+0, -1dB) frequency response with less than 0.05% THD+N and more than 96dB signal-to-noise ratio. Built-in protection circuitry includes full short circuit, open circuit, thermal, ultrasonic, and RF protection.
  • It also features power on/off muting function to prevent popping in the speakers when power is turned on or off.
  • There is also a selectable limiter, which serves as a brick wall on volume to prevent high volume levels from driving the amplifier into clipping, which can cause speaker damage.
Add 300 watts of clean and stable power to your studio rack using this 300-Watt Studio Audio Amplifier from Monoprice!

This rack-mountable switching Class D amplifier packs 300 watts of power into a compact form factor, which takes up only 1U of rack space. It can be used as a stereo amplifier or can be bridged for mono mode.

In stereo mode it produces 150 watts per channel RMS (300 watts per channel peak) into a 4-ohm load or 100 watts per channel RMS (200 watts per channel peak) into an 8-ohm load. When driving a 2-ohm load, it can produce 250 watts per channel RMS (500 watts per channel peak). When bridged for mono mode, the amplifier produces 500 watts RMS (1000 watts peak) into a 4-ohm load and 360 watts RMS (720 watts peak) into an 8-ohm load. Additionally, it is stable when using reactive or mismatched loads, so for example, you can connect a 2-ohm speaker to one channel and an 8-ohm speaker to the other without any problems.

It features an extremely flat 20Hz ~ 20kHz (+0, -1dB) frequency response with less than 0.05% THD+N and more than 96dB signal-to-noise ratio. Built-in protection circuitry includes full short circuit, open circuit, thermal, ultrasonic, and RF protection. It also features power on/off muting function to prevent popping in the speakers when power is turned on or off. There is also a selectable limiter, which serves as a brick wall on volume to prevent high volume levels from driving the amplifier into clipping, which can cause speaker damage.

Features:
• Class D amplifier
• High current switching power for high power output, low noise, and low distortion
• Extremely flat 20Hz ~ 20kHz (+0, -1dB) frequency response with less than 0.05% THD+N
• Balanced 1/4″ TRS and XLR inputs
• Unbalanced 1/4″ TS and NL4 speaker twist speaker outputs
• Built-in optional limiter helps prevent clipping
• Short circuit, open circuit, thermal, ultrasonic, and RF protection
• Stable with reactive and mismatched loads
• Power on/off muting function
• Separate gain controls for each channel
• Signal and clipping LEDs for each channel
• Power and protection LEDs
• Bridgeable for high-power mono operation
• 1U height
• Includes rack mount ears

Reviews

There are no reviews yet.

Be the first to review “Monoprice 300-Watt (150w RMS x2) Studio Audio Amplifier (605030)”

Your email address will not be published. Required fields are marked *